The automatic single-yarn tenac Sample data, including breaking strength, breaking elongation, breaking time, breaking strength, tensile curve, statistical values and other functions, and can increase the modulus, creep and other test requirements according to customer needs. This equipment can continuously test up to 20 different varieties of yarn chemical fiber filaments. The storage of test results and data can be transferred to the test folder of the computer through the serial port of the instrument. The mature operating software provides multiple sets of charts, tensile force Long curves, statistical reports.
The instrument is equipped with a 10.4-inch large-screen touch screen. The touch screen can set test data such as clamping distance, tensile speed, linear density, number of tubes, and times, and the parameters set on the touch screen are synchronized with the computer software. During the test, the movable pneumatic clamp can quickly move to the proper position of the yarn for testing, until the sample is pulled and the waste yarn is sucked away by the compressed air, the test results and data are automatically stored, and then the clamp returns to the starting position position, and perform a new round of testing. This operation will automatically and continuously test until all the yarns of the set number have been tested.
[The performance characteristics of the fully automatic single yarn strength machine are as follows]
1. The instrument automatically clamps yarn, automatically moves yarn, automatically changes yarn, automatically cuts yarn, automatically stretches, automatically alarms, and automatically saves test data and statistical reports.
2. The instrument can be customized by software or hardware according to the special needs of customers (such as statistics of reports, elastic modulus, creep, etc.), and can also be customized according to customer needs and foreign standards (American standard, European standard, date mark, etc.).
3. Adopt 10.4-inch large-screen touch screen operation, easy to operate, more intuitive display and good experience. The touch screen has a built-in 26-key Chinese and English input method. The touch screen can directly set the operator's name, sample name, batch number, test standard, temperature, humidity, clamping length, stretching speed, pre-tensioning, number of test tubes, number of tests, line Density, tensile test unit CN/N and other test parameters, and the set test parameters are synchronized with the computer software. When a test is over, the touch screen will directly display the current number of test tubes, the current number of tests, the current test breaking strength and other data. And you can stop or pause the test at any time, more flexible operation.
4. The preloading tension adopts automatic loading, which is determined by the product of the linear density (fineness) of the sample and the preloading tension coefficient.
5. Users can easily perform daily maintenance or calibration of the instrument according to the manual and touch screen, and can independently calibrate the load cell, clamping length, stretching speed, and the number of coils on the creel.
6. With big data statistics function, it can generate weekly, monthly and annual reports, which is convenient for customers to control product quality.
7. The instrument has high test accuracy, good repeatability, reduces human error, saves labor, and greatly improves work efficiency.
8. The clamping method adopts pneumatic clamping, which does not damage the sample to be tested.
9. Adopt AC servo system to drive, constant torque, stable transmission, fast speed and high efficiency.
10. The yarn movement shift adopts stepper motor and lead screw, which has high positioning accuracy and good repeatability.
11. Using high-precision load cells, the test data is accurate.
12. The creel can hang 20 tubes of samples to be tested at the same time, and the movement is controlled by a stepping motor to exchange samples.
13. Pneumatic scissors are used to cut off the current test sample before replacing the next tube to be tested.
14. The manipulator uses compressed air to control the cylinder to realize the movement of the manipulator, so that the sample can be automatically clamped.
15. The machine adopts pneumatic upper and lower grippers, which controls the movement of the cylinder through compressed air to control the upper and lower chucks, which are used to clamp and stretch the samples to be tested.
16. The machine is equipped with a waste silk storage box. During the operation, the waste silk will be stored in the storage box through the yarn suction tube.
17. The built-in air pressure gauge of the machine can display the air pressure of the compressed air. It is equipped with an air pressure regulating valve. Pulling the valve out can be used to adjust the air pressure of the compressed air. Pressing the valve in can realize self-locking.
18. Operating software: Multi-language software such as Chinese, English, and traditional Chinese can be customized.
19. The test report can be exported to various file formats such as Excel, Word, PDF, etc., which is convenient for customers to conduct laboratory network comparison and evaluation.
